The concrete mixer truck correct operation and maintenance method

Concrete mixer truck transportation concrete essential work from concrete mixing station, concrete truck is reasonable, belong to the large vehicles, a person with relevant experience and driver's license for reasonable operation, to make the vehicle is running normally, the following will introduce you to the correct operation and maintenance of concrete mixer truck method.
1) when driving indoor manipulation handles, don't trample accelerator pedal.
2) when the car is driven to stir, operating handle shall be placed in the "churning" file, driving indoor inverse controller also should be locked. Such as the operating handle is still placed in the "incoming material, mixing" file, will reduce the quality of ready-mixed concrete, thus influence on the performance of the mixer truck driving.
3) Preheat theidling engine preheating before the concrete mixer works.
4) When pull operating handle, do not too hard
4. Slow turning speed of the engine.
Add concrete mixing canister, make the mixing tube in rotating state, the engine speed should be controlled in 450-500 r/min. The occasion of the engine at low speed rotation, make with premixed concrete mixing canister, tends to lead to the engine flameout, easy to damage the clutch and bearing (clutch gearbox), etc.
Above is the right operation method and maintenance of concrete mixer truck, within a reasonable use, also have to be very good maintenance of vehicles, because it is transportation concrete, high strength building materials, easy to make the vehicle damage, pollution, prolong the service life of the vehicle and performance.