Solution about concrete mixer accessories blocking pipe

In concrete mixer operation, a large number of engineering raw materials will affect machinery and accessories, actually it is easier to cause blocking pipe , the pipe pressure, will be whether anticipation of blocking pipe for accessories. The following Bona as a professional  concrete mixer supplier will introduce you what to do when the concrete mixer accessories meet tube jam?

On one side for pumping a reverse pump operation, a edge line inspection, can use a small hammer is considered to be blocked, sometimes can make the congestion collapse and recovery of the aggregate: tapping is invalid, if not reoccupy hammer or other possible damage pipe objects.
If blocked parts have accurate judgment, and blocked when the place is not far from the end of the discharge pipe, as long as the plug section of pipe to be removed, remove blocked which has concrete, back again, you can continue to pump.

Blocking pipe parts is easy to judge when they are at pipeline apart; As long as for pump operation, from open nozzle have a concrete, then open position and stick up between concrete pump, should continue to check until you find blocked parts. If the blocking pipe place far away from the pipe end, blocking section is cleared after back into line, due to the effect of the atc air plug, can also cause jam again. In this case, it should be blocked after the period of pipeline with compressed air to blow out and taking over pumping concrete. If you can't judge or difficult to quickly remove plugging pipe points, gas washing method should be adopted in concrete blow, in the case of blocking pipe, often require segmented purge.

If can't purge into shorter section, organize manpower as soon as possible, the whole pipeline section by disassembly, removal of concrete, and rinse clean with water.
That is encountered in concrete mixer accessories when blocking pipe solution, professional for the correct operation can often avoid this problem, but, because of the materials and works lead to blocking pipe, is about to undergo screening and solved, in order to avoid damage to the machine and the influence on work efficiency.