Concrete batching plant fuel tank parts structure understanding and maintenance

The operation of the power station is closely interrelated with the strong power, strong operational capacity, of course, inseparable from the fuel generator. The fuel tank of concrete batching plant construction also need to do a comprehensive understanding, whether in use or some troubleshooting and so on, can have very good help, also can in good maintenance and service. The following Bona will introduce you to the fuel tank of concrete batching plant accessories.
Middle of the fuel tank of concrete mixing station, there is a baffle, separate the suction hose and return pipe of the tank, let walk, pipelines for oil only, in accordance with the planning, it is more advantageous to the oil cooling, but also can avoid air bubbles in the oil. In the side of the tank has an oil level gauge, can be very convenient to check the oil, also can see the temperature inside the fuel tank, fuel tank with an air filter, can join the filtered hydraulic oil, can do and air connections, also prevent tank into the dust. In the bottom of tank and an oil drain plug, can be in the maintenance or cleaning tank when emptying the remaining oil in tank. Level gauge can be used to check the height of the oil can not only see the oil emulsion, etc., working in the concrete mixing station oil level cannot be lower than the level in the middle of the scale.
Preferably not less than the level of the line at the top of the roughness. Oil suction filter filtration precision for 100, when the vacuum gauge pointer to red area, it shall timely replacement of filter.
Above is the use of the concrete batching plant parts, professional operation personnel must understand the use of knowledge, not only can better maintenance, in use can also be more careful attention and know the operating error, will cause the parts damage, can also in rapid screening of fault, to solve the problem.