Which is divided into horizontal shaft mixer models

Compulsory mixer by the barrel, frame, motor, reducer, rotating arm, mixing spatula, scraper, etc. constitute a clear material. Due to the cross shaft assembly between stirring and rotating arm connected shovel and set screw rod or regulation stir shovel work space, you can basically eliminate the phenomenon of rigid material stuck to reduce the running resistance and reduce wear. General engineering in the choice of compulsory mixer can be divided into single horizontal shaft and twin-shaft mixer.
The following detailed description about your compulsory mixer model segments:
One bedroom main shaft JDC350 and JDC500;
Twin-shaft main JS500, JS750, JS1000, JS1500, JS2000 and so on.
Compulsory mixer role:
JS1000 Concrete Mixers can mixing various consistency ordinary concrete mixture, which plastic concrete mixture is more appropriate to select a horizontal axle in lightweight aggregate concrete mixture mixing of performance but also in other models can not compare the impact energy during self-loading concrete mixer lightweight aggregate produced by falling too small to produce the necessary agitation; vertical shaft mixer, especially high efficiency planetary mixer, although mixing lightweight aggregate concrete mixture, but to overcome the lightweight aggregate floating role than horizontal shaft mixer valid. So lying shaft mixer has forced a machine characteristics. Capacity 1.5m3 below, should use one-bedroom shaft, bearings and shaft seal can thus be reduced by half, so that the structure is simple, maintenance work can also be reduced; capacity 1.5m3 above, should use twin-sleeve, Such mixing tube diameter can be smaller, highly reduced accordingly. This mixer was used aggregate maximum particle size depending on the capacity of 80 ~ 180mm. Zhengzhou Bona production forced mixer can be composed of simple mixing station with the corresponding batching machine, cement tank, cement conveyors and other equipment.