Ready mixed concrete mixing plant parts well lubricated

In order to make the project ready mixed concrete mixing plant parts to achieve a good lubrication, must pay attention to the following points:
    A ) in accordance with the Project stationary concrete batching plant parts manual lubrication requirements imposed on the various parts of periodical mixing station , right on time to join the viscosity lubricant .
    2 ) the amount of oil must remain adequate, adding the oil tank or oil tank should be achieved within the meaning of mooring labeled water almost. Added to the high-speed rotation of the bearing oil should be appropriate, not too much or too little , otherwise it will heat damage .
    3 ) oil must be very pure , clean, not mud with impurities , dust, debris and water density , so as to prevent the destruction of lubrication and damage the surface of the concrete mixing station Part Part .
    4 ) oil tank, oil tank , mixing station parts manual shall provide for periodic replacement. Kerosene oil must be used to clean the oil pools .
    5 ) Oil eyes, Kai and other oil must be kept closed to prevent dust, debris and other invasive cooling concentrated .
mobile concrete mixing plant parts to achieve a good lubrication, very beneficial for our production , and in the rapid development of today which is the necessary conditions for our concrete mixing plant itself is also very beneficial.