Portable concrete batching plant daily Use

Use Portable concrete batching plant at the time to pay attention , used portable concrete mixers should be set in open position pavement of square wood paving front and rear axles , tires rest, avoid walking tall . Concrete mixers should implement secondary leakage protection, after power must be carefully checked before going to work , turn the empty test considered qualified before use . Debugging difference should be tested at the wheel rotational speed mixing vessel suitable , in general, the automotive air slightly faster speed ratio ( charging ) switch 2-3 , as described in more movable wheel and the ratio between the transmission should be adjusted .

Concrete mixers stirring note:
Small concrete mixer cartridge needs attention daily rotation should be consistent with the direction of the arrow , does not meet the real motor wiring should be corrected. Check the drive clutch and brake flexible and reliable , damaged wire rope or not, whether good or bad track pulley , around accessibility and lubricate parts. Unfinished power , always pay attention to used portable concrete mixers whether the various components of the operation . Shutdown, always check whether the concrete batching small concrete mixer blade bent or loose screws have been eliminated .

Concrete mixing completed or stopped 1h more than expected in addition to clear, stone and water should be collected into the bucket rotation guide shaking the stick in the mortar barrel flush all unloaded. No water in the barrel , thus avoiding barrels and leaf rust . Also should clean mixing tube fouling , mechanical kept clean and in good condition . When the small concrete mixer stopped working , when not in use , it should be wind power , and lock switch box to ensure safety .