Dry mix concrete batch plant what would happen too quickly

In Dry mix concrete batch plant operation process , we must follow the operating instructions on use, so not only can make us safe operation , you can also extend the life of the machine . concrete batching plant in donesia if not strictly follow the instructions to use during the operation , then the operation will lead to excessive following adverse effects.
Small concrete batching plant excessive breakage reasons:
Mainly due to excessive vibration sieve damage are: unqualified screen quality , screen tension strength, vibration motor steering error , clay buildup .
The solution is:
1 , the screen is not enough tension that caused the screen fibrillation, often layering broken or damaged at the edges or edging along the screen .
2 , screen quality standard , generally mesh sieve layer and the lower layer of the upper part of the force , requiring close fit between these two layers , pre-tensioning process if the screen is poor, the bottom of the screen when the force when layer taut , screening layer is not taut , throw cuttings work force is greatly reduced , can not be discharged cuttings .
3, small concrete batching plant vibration motor steering errors when debugging vibration motor steering, site operators based on past experience with single-axis shaker or linear vibrating screen , as long as the cuttings to move forward on the line, but this method is not applicable to balanced elliptical shaker. If the motor is rotated inward mistake , though also a forward projection angle 45 °, but cuttings have to scroll backward force , then transport the cuttings forward speed is much slower in the sieve to stay a long time, even cause cuttings can not be discharged .