Causes of failure of diesel concrete mixer analysis

Zhengzhou Bona manufacturer of concrete mixing station is a professional sales and production as one of the direct manufacturer . I'm a professional manufacturer of twin shaft concrete mixer technicians and researchers. Today by our professional technicians for your Overview concrete mixing station failure reasons:
1 , due to the new concrete mixing station rough surface affect friction components damaged parts , new machinery parts processing , assembly and adjust other factors, its friction surface roughness , the smaller the area of ​​contact with the surface , the uneven state of the surface pressure . Machine running process, the surface of the convex portion parts fit together rubbing , grinding down to the metal debris , but also as an abrasive , friction continued participation , but also accelerated the wear parts with surfaces. Therefore , run-in period easily cause wear parts , wear faster .
2 , concrete mixing plant lubricant wear caused by improper new parts between the two parts , the smaller the gap due to the concrete mixer prices in india with a new assembly of parts , and because of assembly and other reasons, it is difficult to ensure uniformity with the gap , oil on the friction surface is not easy to form a uniform film, to inhibit wear. Thus decreased lubrication performance , resulting in the early parts of abnormal wear . Will cause serious friction with precision surface scratches or bite phenomenon, leading to failure.
3, the reason for the loose components affect the normal operation of the machine . Diesel concrete mixer processing and assembly of new parts , there is a bias with the size and geometry of the initial application , due to shock, vibration , etc. alternating load , and the effects of heat, deformation and other factors, coupled with excessive wear and other reasons easily have been tightened so that the occurrence of loose parts .