How to power up the asphalt mixing plant commissioning

Asphalt mixing plant is a main function is production equipment of bituminous concrete asphalt, stone, mixed with cement according to certain gestures, devices of high temperature is heated to 150 degrees. Covered with paver to the construction of the highway. How to test power on the dry mix concrete batch plant running:
(1) running on a single machine, check the currents, steering and insulation as well as mechanical drive is functioning properly. Press this one by one and check the motor and mechanical parts.
(2) identify each motor and mechanical drive parts are found running, even commissioning.Gearing in commissioning, conduct roving checks to its key parts, found abnormal sound and timely investigated and ruled out. 　　
(3) turn on the appliance, first open air compressors, pressure rated pressure value is reached, 15mim, its components such as control valves, pipe, the cylinder shall not leak, normally reliable safety valve or pressure limiting valve movement.
(4) connected to oil supply, oil installations, fuel supply and return lines must not leak and rust using rust-proof elements or taken measures.Ministries in charge of road such as pressure gauges and flow meters is intact. 　　
(5) the hydraulic part for fuel or oil leakage of pipeline control part shall not, the safety valve or pressure limiting valve to function properly and reliably. 　　
(6) all the roller conveyor should be running a flexible, and good performance, effective conveying material guarantee full operation without overflow or accept the accumulation of points, the alarm device shall be sensitive and reliable.
(7) to ensure that raise the hopper (car) smooth running inside the chute.Adjusting the tensioning of wire rope and lift motor brake the gap between normal value for 0.4mm~1.2mm. 　　
(8) screw conveyor, after running should be flexible, smooth, no abnormal noise. 　　
(9) the pneumatic conveying of additive, should make its pressure is not greater than 0.49kg/cm2 storage silos, pipes and fittings shall be gas-tight, automatic vacuum cleaner additive silo and pneumatic safety devices are reliable, easy to adjust, residual emissions should be thoroughly. 　　
(10) the detection levels, environmental dust removal system, testing pressure of all dust and dust tightness.
(11) use of old equipment, stirred the pot liner should be checked for wear, and replace the worn parts and adjustments to ensure their normal work.
We know that concrete mixing batch plant itself and the selection of concrete mixing station in construction machinery has many advantages, therefore, demand for asphalt mixing plant in China will continue to grow in the future, asphalt mixing plant in China will have broad development prospects.