Maintenance of concrete pump

(1)Check threaded connection, to ensure a firm connection.

(2)Filled with grease, water plus 2 / 3 water and 1 /3 of the oil or hydraulic oil.

(3)Check the lubrication system work, you should see the progressive distributor indicator rod back and forth action, S tube arm position end bearings, stirring shaft bearings lubricating oil and other lubrication points position overflow. Manual lubrication points each class should inject grease.

(5)Inspect the valve commutation, reversing the normal operation of the mixing device.

(6)Check the hydraulic system if there is leakage, oil leakage.

Bsides, there is a question that you have to consider: repair and maintenance of the quality and work of a great relationship, if too much dust, the filter should be bold. So cleaning cycle can not be generalized.

 

Pre: Brief introduction of HZS120
Next: Inevitable trend of concrete mixing plant