How to debug a double shaft concrete mixer machine?

JS series double shaft concrete mixer is a kind of forced concrete mixer machine, which is very popular both at home and abroad. Do you know how to install and debug JS series double concrete mixer machine? Now Bona tells you that as follow:

Ⅰ.Double shaft Concrete mixer installation

1. The installation site should be level; the mouth of pit should be higher than the ground.

2. When install the machine, the operator should pay attention to keep the rack at the same level.

ⅡConcrete mixer machine inspection before debugging
1. Check whether the motor and electrical devices wiring are secure.
2. Check whether the lubrication of the twin shaft concrete mixer reducer and components is common.
3. Check whether the wire rope is neatly arranged on the reel, if there are any loose, the rope should be winded again.

Ⅲ Double shaft Concrete mixer machine debug
1. Start the motor to lift the hopper, check whether the upper and lower limit is firm.

2. Start the blender motor, check whether the rotation direction of belt pulley is consistent with the label; if there is any wrong, change the power supply wiring.

3. Start the pump motor, and check the rotation direction.

4. Open and close the discharging door, and check whether the discharging door in the right place.